Anker SOLIX C1000 Portable Power Station - 1056Wh | 1800W

⚡ Anker SOLIX C1000 Portable Power Station (A1761221) – 1056Wh | 1800W

Powerful, Fast-Charging Portable Energy for Home, RVs & Outdoor Adventures

✨ Key Features

• ✅ 1056Wh Expandable Capacity: Increase the capacity of the Anker SOLIX C1000 with an additional 1056Wh for extended power availability.
• ✅ Rapid Recharging: Reach 80% battery capacity in just 43 minutes and achieve a full charge in under an hour.
• ✅ Power Multiple Appliances: Provides up to 2400W of power through 11 ports, allowing you to power a wide range of appliances simultaneously.
• ✅ Fast Solar Recharging: Supports up to 600W solar input and can be fully recharged in as little as 1.8 hours under suitable conditions.
• ✅ Smart App Control: Monitor energy usage and manage the power station through Wi-Fi and Bluetooth connectivity.
• ✅ Long-Lasting LFP Battery: Built with LiFePO4 batteries designed to provide up to 3,000 charge cycles.
• ✅ Outdoor Versatility: Designed to provide reliable portable power for RVs, camping, travel, and outdoor activities.

📊 Specifications

🔋 Solar Charging

The Anker SOLIX C1000 supports solar charging through an 11–60V solar charger with an XT-60 connector. For 11–32V input, the supported current is up to 10A, while 32–60V supports up to 12.5A. For best compatibility, Anker recommends its 625, 531, or PS400 solar panel series.

💡 Usage & Maintenance

• 🔹 Turn off all outputs when the power station is not in use to help minimize battery drain.
• 🔹 Store the power station in a cool and dry environment.
• 🔹 Check the battery level regularly and recharge it when needed.
• 🔹 Fully charge the unit at least once every 3 months during storage.
• 🔹 Use the Anker app to monitor and manage the power station through Wi-Fi or Bluetooth.

❓ Frequently Asked Questions

Can the C1000 be charged through AC and DC simultaneously?
No. AC input is prioritized when both AC and DC inputs are connected. Once AC charging ends, the power station automatically switches to DC charging.

How do I activate SurgePad™?
SurgePad™ activates when the total output exceeds the rated output. It works best with heat-generating devices and is not intended for precision instruments or devices with strict voltage requirements.

Why might the car charging port fail to charge a device below 120W?
Overload protection may sometimes be triggered. To avoid this, connect the device to the car charging port first, then activate the car charging switch.

💡 Why Choose Anker SOLIX C1000?

The Anker SOLIX C1000 combines a large 1056Wh capacity, powerful 1800W output, rapid charging, up to 600W solar input, and a long-lasting LFP battery. With 11 ports, smart app connectivity, and expandable capacity, it is a versatile portable power solution for home backup, RVs, camping, and outdoor use.